Honda Accord 2008 Manual page 1608

07/11/02 09:29:43 61TA0000_200_0041
7. Pull the outer handle (A) back, and out as shown to
remove it from the door. Take care not to scratch
the door.
＊０５
8. Release the hooks (A, B), then remove the outer
handle front seal (C) and the outer handle rear seal
(D).
＊０６
B
C
A
A
A
B
D
9. Remove the outer handle base (A).
–1 Detach the rod fastener (B).
–2 With a clip remover, disconnect the outer
handle rod (C).
–3 Loosen the nut.
–4 Release the hook (D), and slide the outer
handle base forward to release the special bolt
(E) from the door panel.
Fastener Location
: Nut, 1
D
B
B
C
6 x 1.0 mm
4.9 N·m
(0.5 kgf·m,
3.6 lbf·ft)
E
A
C
(cont'd)
20-39
＊０７