2Nd Clutch Transmission Fluid Pressure Switch Replacement - Honda Accord 2008 Manual

07/11/02 09:18:13 61TA0000_140_0239

2nd Clutch Transmission Fluid Pressure Switch Replacement

1. Remove the intake air duct.
2. Disconnect the connector (A) from the 2nd clutch
transmission fluid pressure switch (B), and remove
the 2nd clutch transmission fluid pressure switch.
＊０１
3. Install a new 2nd clutch transmission fluid pressure
switch with a new sealing washer (C), and tighten
the 2nd clutch transmission fluid pressure switch to
the specified torque by turning the metal part, not
the plastic part.
4. Check the connector for rust, dirt, or oil, and clean if
necessary, then connect the connector securely.
5. Install the intake air duct.
ＴＡ０８ＡＥＢＥ１０４１０６１０１０１ＫＢＡＴ００
A
C
B
20 N·m
(2.0 kgf·m,
14.5 lbf·ft)
14-237