Honda Accord 2008 Manual page 1667

07/11/02 09:31:26 61TA0000_200_0100
Interior Trim
Trim Removal/Installation - Door Areas (cont'd)
5. Remove the driver's kick panel (A) or the
passenger's kick panel (B).
–1 Pull out the door opening seal (C) as needed
–2 Pull the kick panel back by hand to detach the
Driver's side
＊０３
Fastener Locations
: Clip, 2
(Gray)
C
C
Passenger's side
＊０４
Fastener Locations
: Clip, 2
(Gray)
B
20-98
from the kick panel hooks (D) and the door
opening flange.
clips, then remove it.
D
D
6. Pull out the door opening seal (A) from the trim
hooks (B) and around the door opening flange, then
remove the seal.
7. Install the trim in the reverse order of removal, and
note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips, the hooks, and the tabs into place
A
securely.
• Driver's side: Before tightening the opener
mounting bolt, position the door sill trim against
the opener firmly by screwing the trim onto the
opener.
C
C
A
A
B
＊０５