Honda Accord 2008 Manual page 1599

07/11/02 09:29:09 61TA0000_200_0032
Doors
Front Door Sash Inner Trim Replacement (cont'd)
4-door
NOTE: Take care not to scratch the door.
1. Remove the door panel (see page 20-16).
2. Lower the glass fully.
3. Remove the front door sash inner trim (A).
–1 Detach the clip fastening the trim.
–2 Pull back along the outside edge of the trim to
–3 Release the hook (C) from the glass run
–4 Pull back along the outside edge of the trim to
–5 Release the rear hook (F) from the door.
Japan-produced models
＊０１
Fastener Location
: Clip, 1
(Gray)
D
E
20-30
release the hooks or the hook strip (B) from the
door glass opening flange at the A-pillar
portion and the roof portion of the door sash.
channel (D) at the rear corner portion of the
door sash.
release the hooks or the hook strip (E) from the
door glass opening flange at the B-pillar
portion of the door sash.
D
E
A
B
D
C
B
B
F
USA-produced models
Fastener Location
: Clip, 1
(Gray)
C
D
E
4. Install the trim in the reverse order of removal, and
note these items:
• If the clip is damaged or stress-whitened, replace
it with a new one.
• Push the hooks and the clip into place securely.
A
A
ＴＡ０８ＡＢ４Ｊ１６１２６７２１５１１ＫＢＡＴ００
D
E
A
D
B
A
B
A
F
＊０２