07/11/02 09:22:17 61TA0000_140_0337
ATF Pump Inspection
1. Install the ATF pump drive gear (A), the driven gear
(B), and the ATF pump driven gear shaft (C) in the
main valve body (D). Lubricate all parts with ATF,
and install the ATF pump driven gear with its
grooved and chamfered side facing up.
*01
A
B
D
2. Measure the side clearance of the ATF pump drive
gear (A) and the driven gear (B).
ATF Pump Gears Side (Radial) Clearance
Standard (New)
ATF Pump Drive Gear:
0.210 0.265 mm (0.0083 0.0104 in.)
−
ATF Pump Driven Gear:
−
0.070 0.125 mm (0.0028 0.0049 in.)
C
3. Remove the ATF pump driven gear shaft. Measure
the thrust clearance between the ATF pump driven
gear (A) and the main valve body (B) using a
straight edge (C) and a feeler gauge (D).
ATF Pump Drive/Driven Gear Thrust (Axial)
Clearance
Standard (New): 0.03 0.05 mm (0.001 0.002 in.)
Service Limit:
A
TA08AEBE10480113021MAAT00
−
−
B
−
−
0.07 mm (0.003 in.)
C
B
D
*02
A
*03
14-335