Honda Accord 2008 Manual page 796

07/11/02 09:24:31 61TA0000_130_0023
46. Install the shift cable bracket (A) and the shift
cables (B).
＊２７
(P/N 08798-9002)
B
47. Apply a light coat of super high temp urea grease
(P/N 08798-9002) to the cable ends, and install lock
pins (C).
48. Install the under-hood fuse/relay box (A).
＊２８
8 x 1.25 mm
27 N·m
(2.8 kgf·m,
20 lbf·ft)
B
A
C
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
49. Apply a light coat of super high temp urea grease
(P/N 08798-9002) to the end of the slave cylinder
rod. Install the slave cylinder. Be careful not to
bend the clutch line.
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
(P/N 08798-9002)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
50. Install the battery base (see step 64 on page 5-22).
51. Install the air cleaner assembly (see page 11-385).
52. Do the battery installation procedure (see page
22-90).
＊２９
(cont'd)
13-23