Transmission Reassembly - Honda Accord 2008 Manual

07/11/02 09:25:15 61TA0000_130_0057

Transmission Reassembly

NOTE: Prior to reassembly, clean all parts in solvent,
dry them, and apply MTF to any contact surfaces.
1. Install the magnet (A) and differential assembly (B).
NOTE: Clean the magnet anytime the transmission
is disassembled.
＊０１
B
2. Install the 28 mm spring washer (A) and the 28 mm
washer (B) over the ball bearing (C). Note the
installation direction of the spring washer.
＊０２
3. Apply vinyl tape to the mainshaft splines (D) to
protect the seal. Install the mainshaft assembly (E)
and the countershaft assembly (F) with the shift
fork assembly (G), as an assembly.
G
B
A
4. Install the reverse shift fork (A).
A
5. Install the reverse idler gear (A) and reverse gear
shaft (B) by aligning the mark (C) with the reverse
gear shaft hole (D).
F
E
D
C
ＴＡ０８ＡＥＡＥ３４１５０１０００００ＬＤＡＴ００
6 x 1.0 mm
15 N·m (1.5 kgf·m, 11 lbf·ft)
D
C
13-57
＊０３
A
＊０４
B
A
(cont'd)