Countershaft 3Rd Gear And Reverse Selector Hub Installation - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:22:50 61TA0000_140_0350

Shafts and Clutches

Countershaft 3rd Gear and Reverse Selector Hub Installation

Special Tools Required

Driver, 40 mm I.D. 07746-0030100

1. Install 2nd gear, 1st gear, 5th gear, and the

37 x 41 x 54.3 mm collar on the countershaft.

2. Slide 3rd gear (A) over the countershaft, and press

it in place using the 40 mm driver and a press.

3. Install the cotters, the 35 x 47 x 7.8 mm collar, the

set ring, the needle bearing, and 4th gear.

4. Slide the reverse selector hub (A) over the

countershaft, then press it in place using the 40 mm

driver and a press.

NOTE: Some reverse selector hubs are not press-

fitted, and can be installed without using the 40 mm

driver and a press.

07746-0030100

ＴＡ０８ＡＥＢＥ１０４１０９１７４５１ＫＣＡＴ５０

07746-0030100

Table of Contents