Honda Accord 2008 Manual page 1365

07/11/02 09:28:04 61TA0000_180_0032
Front Suspension
Damper/Spring Removal and Installation (cont'd)
5. Remove the front strut brace mounting nuts (A) (if
equipped).
＊０３
6. Remove the damper mounting nuts (B) from the
top of the damper. Do not let the damper/spring
drop down under its own weight.
7. Remove the damper/spring (A).
NOTE: Be careful not to damage the body.
＊０４
18-32
Installation
1. Position the damper/spring (A) in the body with the
A
8 x 1.25 mm
B
10 x 1.25 mm
Replace.
2. Loosely install the new damper mounting nuts (A)
A
3. Loosely install the front strut brace mounting nuts
aligning tab (B) facing inside.
NOTE: Be careful not to damage the body.
B
to the top of the damper.
B
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
(B) (if equipped).
＊０５
A
＊０６
A
10 x 1.25 mm
55 N·m
(5.6 kgf·m,
41 lbf·ft)
Replace.