Honda Accord 2008 Manual page 1677

07/11/02 09:32:28 61TA0000_200_0110
Interior Trim
Trim Removal/Installation - Pillar Areas (cont'd)
5. Remove the B-pillar upper trim (A).
–1 Pull the bottom of the trim back by hand to
–2 Pull the bottom of the trim back to release the
–3 Pull the trim down to release the upper hooks
＊０８
E
A
20-108
detach the lower hooks (B).
upper pin (C) from the hole in the body and the
slider (D) from pin (E) on the front seat belt
shoulder anchor adjuster.
(F) from the holes in the body.
F
F
C
D
B
6. Pass the front seat belt (A) lower anchor out
through a hole in the slider (B), then remove the
B-pillar upper trim (C).
A
B
C
B
A
＊０９