07/11/02 08:47:44 61TA0000_140_0086
Automatic Transmission
DTC Troubleshooting (cont'd)
40. Measure the voltage between transmission range
switch connector terminals No. 5 and No. 10.
*14
TRANSMISSION RANGE SWITCH CONNECTOR
Is there battery voltage?
YES
−
NO
41. Turn the ignition switch to LOCK (0).
42. Jump the SCS line with the HDS.
43. Disconnect PCM connector B (49P).
14-84
ATP FWD (YEL/RED)
GND (BLK)
Wire side of female terminals
−
Go to step 45.
Go to step 41.
44. Check for continuity between PCM connector
terminal B29 and body ground.
PCM CONNECTOR B (49P)
ATP FWD (BLU/YEL)
Terminal side of female terminals
Is there continuity?
YES
−
Repair short to body ground in the wire
between PCM connector terminal B29 and the
transmission range switch, then go to step 50.
NO
−
Go to step 57.
*15