Honda Accord 2008 Manual page 1109

07/11/02 09:19:19 61TA0000_140_0266
Automatic Transmission
Transmission Installation (cont'd)
52. Secure the power steering fluid line clamp (A) and
the fluid return hose clamp (B) with the bolts.
＊２５
B
53. Install the gearbox mounting bracket bolts (A) on
the rear engine mount base bracket.
＊２６
54. Install the heat shield with the bolts (B).
14-264
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
A
A
10 x 1.25 mm
39 N·m (4.0 kgf·m, 29 lbf·ft)
B
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
55. Install a new front mount bolt (A).
B
E
F
D
56. Install the front mount stop (B) and the vacuum
hose clamp bracket (C).
57. Install the vacuum hose (D) on its clamp (E) at the
mark (F).
12 x 1.25 mm
78 N·m
(8.0 kgf·m,
58 lbf·ft)
C
Replace.
A
10 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
＊２７