Honda Accord 2008 Manual page 1768

07/11/02 09:37:41 61TA0000_200_0201
4. From under the seat cushion, disconnect and/or
detach the connector(s):
• Driver's seat (10-way power seat):
– Side airbag connector (A)
– Recline motor harness connector (B)
– Seat-back heater connector (C)
• Driver's seat (manual height adjustable seat)/
Passenger's seat: Side airbag connector (D)
Driver's seat (10-way power seat)
＊０３
E
J
F
Driver's seat (manual height adjustable seat)
＊０４
C
B
G
I
H
Passenger's seat (manual seat)
D
E
F
A
E
5. Detach the harness clip(s) (E), and remove the wire
ties (F). On the manual height adjustable seat, pry
up the hooks (G) of the harness holder (H), then
release the holder from the seat cushion frame
spring (I).
6. Driver's seat (10-way power seat): Release the wire
F
tie (J) of the harness clip fastening the recline
motor harness, the seat-back heater harness, and
the seat cushion heater harness together.
7. Remove the screws, then gently pull down the back
cover (A) to release the hooks (B) from the seat-
back frame, and remove the cover.
Fastener Locations
D
: Screw, 2
E
F
H
＊０５
＊０６
B
A
(cont'd)
20-199