Honda Accord 2008 Manual page 1129

07/11/02 09:19:55 61TA0000_140_0286
Automatic Transmission
Shift Cable Adjustment (cont'd)
7. Push the shift cable (A) until it stops, then release it.
Pull the shift cable back one step so that the shift
position is in R. Do not hold the shift cable guide (B)
to adjust the shift cable.
＊０５
8. Turn the ignition switch to ON (II), and check that
the R position indicator comes on.
＊０６
9. Turn the ignition switch to LOCK (0).
14-284
10. Place the shift lever in R, then insert a 6.0 mm
B
A
(0.24 in.) pin (A) into the positioning hole (B) on the
shift lever, through the positioning hole on the shift
lever, and into the positioning hole on the bracket.
Use only a 6.0 mm pin with no burrs.
Type A Shift Lever
B
A
Type B Shift Lever
B
A
＊０７
＊０８