07/11/02 09:18:13 61TA0000_140_0240
Automatic Transmission
3rd Clutch Transmission Fluid Pressure Switch Replacement
1. Raise the vehicle on a lift, or apply the parking
brake, block the rear wheels, and raise the front of
the vehicle. Make sure it is securely supported.
2. Disconnect the connector (A) from the 3rd clutch
transmission fluid pressure switch (B), then remove
the 3rd clutch transmission fluid pressure switch.
*01
3. Install a new 3rd clutch transmission fluid pressure
switch with a new sealing washer (C), and tighten
the 3rd clutch transmission fluid pressure switch to
the specified torque by turning the metal part, not
the plastic part.
4. Check the connector for rust, dirt, or oil, and clean if
necessary, then connect the connector securely.
14-238
TA08AEBE10410610111KBAT00
A
B
20 N·m
(2.0 kgf·m,
14 lbf·ft)
C