Honda Accord 2008 Manual page 1137

07/11/02 09:20:02 61TA0000_140_0294
A/T Gear Position Indicator
Transmission Range Switch Replacement (cont'd)
8. Install the transmission range switch (A) gently on
the selector control shaft (B) while holding it in the
N position with the 2.0 mm (0.08 in.) blade (C).
＊０５
9. Tighten the bolts on the transmission range switch
while you continue to hold the N position. Do not
move the transmission range switch when
tightening the bolts. Remove the feeler gauge.
＊０６
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
14-292
A
C
B
10. Connect the transmission range switch connector
securely, then install the transmission range switch
cover (A).
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
11. Turn the ignition switch to ON (II). Move the shift
lever through all positions, and check the
transmission range switch synchronization with the
A/T gear position indicator.
12. Check that the engine will start with the shift lever
in P and N, and will not start in any other shift lever
position.
13. Check that the back-up lights come on when the
shift lever is in R.
14. Allow the front wheels to rotate freely, then start
the engine, and check the shift lever operation.
＊０７
A