Honda Accord 2008 Manual page 1160

07/11/02 09:20:47 61TA0000_140_0317
8. Remove the screw (A), the harness wire tie (B), and
remove the light bulb (C) from the socket.
9. Remove the park pin switch/A/T gear position
indicator panel light harness (D).
＊０３
C
10. Apply non-hardening thread lock sealant to the
screw threads. Install a new park pin switch, and
secure the switch with the screw.
11. Tie the harnesses of the park pin switch/A/T gear
position indicator panel light and the shift lock
solenoid at the guide with the harness wire tie.
12. Install the A/T gear position indicator panel light
bulb in the socket.
B
A
D
13. Install the shift lock release spring (A) in the shift
lock release (B).
A
14. Install the shift lock release and the release spring
on the release shaft end.
＊０４
B
(cont'd)
14-315