Honda Accord 2008 Manual page 1591

07/11/02 09:29:04 61TA0000_200_0024
Doors
Front Door Outer Handle Replacement (cont'd)
9. Driver's door: If the retainer (A) of the lock cylinder
cable (B) is damaged, release the hooks (C), then
replace it.
＊１１
B
10. Pull the outer handle (A) back, and out as shown to
remove it from the door. Take care not to scratch
the door.
＊１２
20-22
A
C
A
11. Release the hooks (A, B), then remove the outer
handle front seal (C) and the outer handle rear seal
(D).
B
C
C
12. Remove the outer handle base (A).
–1 Detach the rod fastener (B).
–2 With a clip remover, disconnect the outer
handle rod (C).
–3 Loosen the nut.
–4 Release the hook (D), and slide the outer
handle base forward to release the special bolt
(E) from the door panel.
Fastener Location
: Nut, 1
D
A
A
B
D B
B
6 x 1.0 mm
4.9 N·m
(0.5 kgf·m,
3.6 lbf·ft)
E
A
C
＊１３
＊１４
C