Tire Pressure Sensor Replacement - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:29:49 61TA0000_180_0086

Tire Pressure Sensor Replacement

1. Raise the vehicle, and support it with safety stands

in the proper locations (see page 1-9).

2. Remove the wheel with the faulty sensor.

3. Remove the tire valve stem cap and the valve stem

core, and let the tire deflate.

4. Remove any balance weights, and then break the

bead loose from the wheel with a commercially

available tire changer (A).

Note these items to avoid damaging the tire

pressure sensor:

• Do the outside of the wheel first.

• Position the wheel as shown so the valve

stem (B) is 90 degrees from the bead

breaker (C) as shown.

• Do not position the bead breaker of the tire

changer too close to the rim.

5. Position the wheel so the tire machine (A) and tire

iron (B) are next to the valve stem (C) and will move

away from it when the machine starts. Then

remove the tire from the wheel.

6. Remove the valve stem nut (A) and washer (B),

then remove the tire pressure sensor with valve

stem (C) from the wheel.

NOTE: Check the nut and the washer; if they have

deterioration or damage, replace with new ones

during reassembly.

ＴＡ０８ＡＥ４Ｂ５４１７５１５９６３４ＫＢＡＴ００

Table of Contents