Honda Accord 2008 Manual page 1550

07/11/02 09:37:13 61TA0000_190_0129
8. Turn the ignition switch to ON (II).
9. Measure the voltage between yaw rate-lateral
acceleration sensor 5P connector terminal No. 1
and body ground.
＊０２
Is there battery voltage?
YES
NO −
(7.5 A) fuse in the driver's under-dash fuse/relay
box and the yaw rate-lateral acceleration sensor.
YAW RATE-LATERAL ACCELERATION
SENSOR 5P CONNECTOR
LT GRN
Wire side of female terminals
− Go to step 10.
Repair open in the wire between the No. 6
10. Turn the ignition switch to LOCK (0).
11. Reconnect the yaw rate-lateral acceleration sensor
5P connector.
12. Turn the ignition switch to ON (II).
13. Measure the voltage between yaw rate-lateral
acceleration sensor 5P connector terminal No. 5
and body ground.
YAW RATE-LATERAL ACCELERATION
SENSOR 5P CONNECTOR
Wire side of female terminals
Is there 0.1 V or less?
−
YES Replace the yaw rate-lateral acceleration
sensor (see page 19-138).
NO − Repair open in the wire between the yaw rate-
lateral acceleration sensor and body ground
(G503).
BLK
19-129
＊０３