Honda Accord 2008 Manual page 1791

07/11/02 09:38:20 61TA0000_200_0224
Seats
Rear Seat Removal/Installation
Seat-back
NOTE: Take care not to scratch the body or tear the seat
covers.
1. Fold the rear seat-back forward.
2. Detach the clip that secure the spare tire lid (A) and
the seat-back cover (B) to the body. 2-door is
shown; 4-door is similar.
＊０１
Fastener Location
: Clip, 1
20-222
B
A
A
ＴＡ０８Ａ００Ｊ４６１６６４５３９０２ＫＤＡＴ００
3. Remove the seat-back (A).
–1 Pull the rear center seat belt (B) out through the
slit (C) in the seat belt guide (D).
–2 2-door: Pull the seat-back cover (E) out from
between the seat-back and the trunk side trim
panels (F), then remove the bolts.
–3 4-door: Release the Velcro fasteners (G), and
pull back the seat-back cover (H), then remove
the bolts.
–4 Release the hooks (I) of the pivot brackets (J).
2-door
Fastener Locations
: Bolt, 2
I
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
F
B
B
C
J
E
F
D
＊０３