Honda Accord 2008 Manual page 1718

07/11/02 09:34:14 61TA0000_200_0151
Center Console Armrest Replacement
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE:
• Take care not to scratch the console.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Remove the center console (see page 20-147).
2. Remove the screws securing the driver's side panel
(A) and the passenger's side panel (B) from the
console box (C), and slide the driver's side panel
and the passenger's side panel forward to release
the ribs (D) of the panels from the hooks (E) of the
box, then remove the panels.
＊０１
Fastener Locations
: Screw, 2
3. For some models: Open the console armrest (F),
and remove the box tray (G) by pulling it up.
F
G
D
(Four places)
E
C
(Four places)
B
A
4. Remove the screws, then remove the left box rail
(A) and the right box rail (B) by pulling them up
from the console box (C).
Fastener Locations
: Screw, 8
E
(Four places)
5. Remove the E-clips (A) and the hinge pin (B) from
the console armrest (C) and the console box (D).
D
(Four places)
ＴＡ０８Ａ００Ｊ２６２１６５１７２１１ＫＢＡＴ００
B
C
A
D
＊０２
A
C
＊０３
B
A
(cont'd)
20-149