Shift Lock Release, Release Spring, Release Shaft Replacement - Honda Accord 2008 Manual

07/11/02 09:20:45 61TA0000_140_0314
A/T Interlock System

Shift Lock Release, Release Spring, Release Shaft Replacement

Type A Shift Lever
1. Remove the shift lever (see page 14-273).
2. Remove the A/T gear position indicator panel from
the shift lever.
3. Release the lock (A) of the shift lock release, and
remove the shift lock release and the release spring
(B).
＊０１
4. Release the lock (C) of the shift lock release shaft,
and remove the shaft (D).
5. Replace the shift lock release, release spring, or
release shaft.
14-312
D
C
6. Install the shift lock release spring (A) in the shift
lock release (B).
A
B
7. Install the shift lock release shaft (C) in the shift
lever, and install the shift lock release and the
release spring on the release shaft end.
8. Make sure that the release spring end (A) is
installed in the shift lock release (B), and the
hooked end (C) is on the catch (D).
D
C
9. Install the A/T gear position indicator panel on the
shift lever.
10. Install the shift lever (see page 14-275).
ＴＡ０８ＡＡ１Ｅ１０４３６４１２２８ＧＫＢＡＴ００
C
B
A
A
B
＊０２
＊０３