Honda Accord 2008 Manual page 1467

07/11/02 09:34:14 61TA0000_190_0046
VSA System Components
General Troubleshooting Information
System Indicator
This system has four indicators:
• ABS indicator (A)
• Brake system indicator (B)
• VSA indicator (C)
• VSA activation indicator (D)
＊０１
C
When the system is OK, each indicator comes on for
about 2 seconds after turning the ignition switch to
ON (II), then goes off.
When the system detects a problem, a DTC will be set
and, depending upon the failure, the VSA modulator-
control unit will determine which indicator(s) will be
turned on. If the problem goes away (system returns to
normal), the indicator(s) will be controlled in the
following way depending upon the DTC that was set:
• The indicator(s) will come on and stay on when the
ignition switch is ON (II).
• The indicator(s) will automatically go off.
• The indicator(s) will go off after the vehicle is driven.
19-46
D B A
USA Canada
models models
ABS Indicator
The ABS indicator comes on when the ABS function is
lost. The brakes still work like a conventional system.
Brake System Indicator
The brake system indicator comes on when the EBD
function is lost, the parking brake is applied, and/or the
brake fluid level is low.
NOTE: If two or more wheel speed sensors fail, the
brake system indicator will come on.
VSA Indicator
The VSA indicator comes on when the VSA function is
lost.
VSA Activation Indicator
The VSA activation indicator blinks when the VSA
function is activating. The VSA activation indicator
comes on, when the VSA is turned OFF by using the
VSA OFF switch, or the VSA function is lost.
ＴＡ０８Ａ００Ｄ５２１００００００００ＢＢＡＴ００