A/T Gear Position Indicator Panel Light Harness Replacement - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:20:03 61TA0000_140_0295

A/T Gear Position Indicator Panel Light Harness Replacement

Type A Shift Lever

NOTE: The A/T gear position indicator panel light and

the park pin switch are not available separately.

Replace the A/T gear position indicator panel light and

the park pin switch as a set.

1. Remove these items

• Center console panel (see page 20-145)

• Center console rear trim (see page 20-148)

• Center console (see page 20-147)

2. Remove the shift lever assembly (see page 14-273).

3. Wrap the end of a flat-tip screwdriver with tape, pry

off the shift lever knob cover locks, and remove the

shift lever knob cover (A).

4. Remove the screws (B), and remove the shift lever

knob (C) from the shift lever.

5. Remove the A/T gear position indicator panel light

socket (D) from the panel base (E).

6. Remove the A/T gear position indicator panel (F),

and disassemble the indicator panel and the panel

7. Release the lock (A) of the shift lock release, and

remove the shift lock release and the release spring

ＴＡ０８ＡＡ１Ｅ１０４１０７１２２４９ＫＢＡＴ００

Table of Contents