Honda Accord 2008 Manual page 767

07/11/02 09:15:17 61TA0000_120_0016
Clutch
Clutch Hose Replacement (cont'd)
6. Install the clutch hose (A) into the clutch hose
brackets (B, C) with the new clutch hose clips (D).
＊０４
C
A
7. Connect the clutch lines (A) to the clutch hose (B).
＊０５
12-14
D
B
Replace.
B
A
15 N·m (1.5 kgf·m, 11 lbf·ft)
8. Bleed the clutch hydraulic system (see page 12-6).
9. Do the following checks:
• Check the clutch hose and line joint for leaks, and
tighten if necessary.
• Check the clutch hose for interference and
twisting.
10. Install the battery base (A) and the harness clip (B).
8 x 1.25 mm
21 N·m
(2.1 kgf·m,
15 lbf·ft)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
11. Do the battery installation procedure (see page
22-90).
12. Test-drive the vehicle.
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
8 x 1.25 mm
21 N·m
B (2.1 kgf·m,
15 lbf·ft)
＊０６