Clutch Hose Replacement - Honda Accord 2008 Manual

07/11/02 09:15:16 61TA0000_120_0015

Clutch Hose Replacement

NOTE:
• Replace the clutch hose it is twisted, cracked, or if it
leaks.
• Use fender covers to avoid damaging painted
surfaces.
• Do not spill brake fluid on the vehicle; it may damage
the paint or plastic; if brake fluid does contact the
paint or plastic, wash it off immediately water.
1. Do the battery removal procedure (see page 22-90).
2. Remove the battery base bolts (A), loosen the two
bolts (B), the battery clamp (C), and the harness
bracket bolt (D), then remove the battery base (E).
＊０１
B
D
3. Disconnect the clutch hose (A) from the clutch lines
(B).
A
4. Remove and discard the clutch hose clips (A) from
the clutch hose (B).
E
D
B
C
B
5. Remove the clutch hose from the clutch hose
brackets (C, D).
ＴＡ０８ＡＥＡＥ３４１１６３１７０１０ＫＢＡＴ００
A
B
C
A
(cont'd)
12-13
＊０２
＊０３