Clutch Pedal, Clutch Pedal Position Switch, And Clutch Interlock Switch Adjustment - Honda Accord 2008 Manual

07/11/02 09:15:13 61TA0000_120_0009
Clutch Pedal, Clutch Pedal Position Switch, and Clutch Interlock Switch
Adjustment
NOTE:
• Check the clutch pedal position switch (see page 4-47).
• Check the clutch interlock switch (see page 4-9).
• Remove the driver's floor mat before adjusting the
clutch pedal.
• The clutch is self-adjusting to compensate for wear.
• If there is no clearance between the master cylinder
piston and push rod, the release bearing will be held
against the diaphragm spring, which can result in
clutch slippage or other clutch problems.
1. Loosen the clutch pedal position switch locknut (A),
and back off the clutch pedal position switch (B)
until it no longer touches the clutch pedal (C).
＊０１
(Multipurpose Grease)
E
2. Loosen the clutch pushrod locknut (D), and turn the
pushrod (E) in or out to get the specified height (F),
stroke (G), free play (H), and disengagement height
(I) at the clutch pedal.
F Clutch Pedal Height:
G Clutch Pedal Stroke:
H Clutch Pedal Free Play:
I Clutch Pedal Disengagement Height:
J
10 x 1.25 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
G
H
D
18 N·m
I
F
(1.8 kgf·m,
13 lbf·ft)
174 mm (6.85 in.)
130 140 mm (5.12 5.51 in.) − −
10 18 mm (0.39 0.71 in.) − −
79 mm (3.11 in.)
3. Tighten the clutch pushrod locknut.
4. With the clutch pedal released, turn in the clutch
pedal position switch until it contacts the clutch
pedal.
5. Turn in the clutch pedal position switch an
additional 3/4 to 1 turn.
6. Tighten the clutch pedal position switch locknut.
7. Loosen the clutch interlock switch locknut (J).
8. Press the clutch pedal to the floor.
9. Release the clutch pedal 9 12 mm (0.35 0.47 in.)
from the fully pressed position, and hold it there.
Adjust the position of the clutch interlock switch (K)
so the engine will start with the clutch pedal in this
K position.
10. Tighten the clutch interlock switch locknut .
B
A
11. Check the clutch operation.
10 x 1.25 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
C
ＴＡ０８ＡＥＡＥ３４１１６３１７０４１ＭＢＡＴ００
− −
12-7