Honda Accord 2008 Manual page 763

07/11/02 09:15:15 61TA0000_120_0012
Clutch
Clutch Master Cylinder Replacement (cont'd)
5. Install a new master cylinder seal (A), then install
the master cylinder (B).
＊０６
A
Replace.
6. Install a new O-ring (A) on the clutch line (B), then
apply M-77 assembly paste (P/N 08798-9010) to the
end of the clutch line. Install the clutch line in the
clutch master cylinder (C) with a new retaining clip
(D). Install the master cylinder reservoir mounting
bolt (E).
＊０７
B
12-10
E
6 x 1.0 mm
9.8 N·m
D
(1.0 kgf·m, 7.2 lbf·ft)
Replace.
C
A
Replace.
(P/N 08798-9010)
7. To prevent the retaining clip (A) from coming off,
pry apart the tip of the retaining clip (B) with a
screwdriver.
B
A
8. Make sure the hose clamps (A) are positioned on
the master cylinder (B) and reservoir (C) as shown.
C
1 3 mm −
−
(0.04 0.12 in.)
B
A
UP
LEFT
SIDE
1 3 mm −
−
(0.04 0.12 in.)
＊０８
＊０９
B