Transmission Removal - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:23:54 61TA0000_130_0006

Manual Transmission

Transmission Removal

Special Tools Required

• Engine support hanger, A & Reds AAR-T1256

• Engine hanger/adapter VSB02C000015

• Subframe adapter VSB02C000016

These special tools are available through the Honda

Tool and Equipment Program 888-424-6857.

NOTE: Use fender covers to avoid damaging painted

1. Turn the steering wheel to the straight-ahead

position, then remove the key from the ignition

switch and lock the steering column.

2. Remove the front grille cover (see page 20-255).

3. Do the battery removal procedure (see page 22-90).

4. Remove the air cleaner assembly (see page 11-385).

5. Remove the battery base bolts (A), loosen the two

bolts (B), remove the battery remove the battery

harness clamp (C) and the and the bracket bolt (D)

then remove the battery base (E).

6. Remove the bolts (A), bracket nut (B) then carefully

move the slave cylinder out of the way to avoid

bending the clutch line.

NOTE: Do not press the clutch pedal after the slave

cylinder has been removed.

ＴＡ０８ＡＥＡＥ３４１５０１０００００ＫＡＡＴ００

Table of Contents