Honda Accord 2008 Manual page 771

07/11/02 09:15:20 61TA0000_120_0020
Clutch
Clutch Replacement (cont'd)
Crankshaft Pilot Bushing Inspection
20. Inspect the crankshaft pilot bushing for wear and
damage.
21. Inspect the inside surface of the crankshaft pilot
bushing with your finger. If the crankshaft pilot
bushing is not smooth, replace it; go to step 22.
＊１２
12-18
Crankshaft Pilot Bushing Replacement
22. Remove the crankshaft pilot bushing (A) using the
slide hammer (B), remover handle (C), and bearing
remover shaft (D).
B
07741-0010201
C
07936-3710100
D
07936-3710600
23. Install a new crankshaft pilot bushing (A) into the
crankshaft using the driver (B) and 22 x 24 mm
attachment (C). Apply a light coat of super high
temp urea grease (P/N 08798-9002) to the
crankshaft pilot bushing surface.
B
07749-0010000
2.4 2.6 mm −
(0.09 0.10 in.) −
A
C
07746-0010800
A
(P/N 08798-9002)
＊１３
＊１４