Clutch Pedal Assembly Replacement - Honda Accord 2008 Manual

07/11/02 09:15:14 61TA0000_120_0010
Clutch

Clutch Pedal Assembly Replacement

1. Disconnect the clutch pedal position switch
connector (A) and clutch interlock switch
connector (B).
＊０１
A
E
D
2. Pry out the lock pin (C), and pull the pedal pin (D)
out of the yoke.
3. Remove the master cylinder mounting nuts (E) and
clutch pedal mounting bolt (F).
4. Remove the clutch pedal assembly (G).
5. Remove the clutch pedal position switch (H) and
clutch interlock switch (I).
6. Install the clutch pedal position switch (A) and
clutch interlock switch (B).
＊０２
(Multipurpose Grease)
12-8
I
B
H
(Multipurpose Grease)
7. Install the clutch pedal assembly (A).
F
F
G
C
E
C
8 x 1.25 mm
13 N·m
(1.3 kgf·m,
9.4 lbf·ft)
8. Install the clutch pedal mounting bolt (B) and
master cylinder mounting nuts (C).
9. Apply grease to the pedal pin (D), and slide it into
the yoke, then install a lock pin (E).
10. Connect the clutch pedal position switch connector
(F) and clutch interlock switch connector (G).
11. Adjust the clutch pedal, clutch pedal position
switch, and clutch interlock switch (see page 12-7).
12. Check the clutch operation.
B
A
ＴＡ０８ＡＥＡＥ３４１１６３１７０４１ＫＢＡＴ００
B
8 x 1.25 mm
G
22 N·m
(2.2 kgf·m, 16 lbf·ft)
A
E
C
8 x 1.25 mm
13 N·m
(1.3 kgf·m,
9.4 lbf·ft)
D
(Multipurpose
Grease)
＊０３