07/11/02 09:24:00 61TA0000_130_0015
42. Remove the lower transmission mounting bolts.
Front side
*33
Rear side
*34
43. Pull the transmission away from the engine until
the transmission mainshaft clears the clutch
pressure plate.
44. Slowly lower the transmission about 150 mm (6 in).
Check once again that all hoses and electrical
wiring are disconnected and free from the
transmission, then lower it all the way.
45. Remove the release fork boot (A), the release fork
(B), and the release bearing (C) from the
transmission.
C
B
46. If necessary, remove the release fork from the
clutch housing by squeezing the release fork set
spring (D) with pliers. Remove the release bearing.
*35
D
A
13-15