Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual page 50

JunosE 11.3.x Command Reference Guide A to M
Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx
Models, and ERX310 Router (continued)
Interface Type Description
ATM
interface or
subinterface
ATM 1483
subinterface
6
Interface Specifier
To configure an ATM interface or subinterface:
slot/port[.subinterface ]
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
subinterface—Number of the subinterface
in the range 1–2147483647
To display information about an ATM 1483
subinterface by using show commands:
slot/port/vpi/vci
slot—Number of the chassis slot in the range
0–6 (ERX7xx models), 0–13 (ERX14xx
models), and 0–2 (ERX310 router)
port—Port number on the I/O module
vpi—Virtual path identifier of the PVC on this
ATM 1483 subinterface; allowable numeric
range depends on the module capabilities
and current configuration
vci—Virtual circuit identifier of the PVC on
this ATM 1483 subinterface; allowable
numeric range depends on the module
capabilities and current configuration
Example
atm 3/2.6
atm 3/2/1/2
Copyright © 2010, Juniper Networks, Inc.