Honda Accord 2008 Manual page 1809

07/11/02 09:38:54 61TA0000_200_0242
Bumpers
Front Bumper Removal/Installation
(cont'd)
8. 2-door: Remove the bolts (A) and the clip (B)
securing the front bumper center upper beam (C).
Detach the clip (D), and release the hook (E), then
remove the beam from the body.
NOTE: To remove the clips (B), pry the inner clip up
at the edge near the line (F) on its head.
＊１１
Fastener Locations
A
A
9. Install the bumper in the reverse order of removal,
and note these items:
• Make sure the front bumper engages the hooks
(of both upper beams and side spacers) and the
pins (4-door) (of both headlights) on each side
securely.
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips and the hooks into place securely.
20-240 20-240
: Bolt, 2 B : Clip, 1 D : Clip, 1
F
F
C
D
B
A
E
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
Front Bumper Fog Light Cover
Replacement
2-door
NOTE: Take care not to scratch the front bumper.
1. Remove the front bumper (see page 20-237).
2. Remove the screws (A, B), then remove the front
bumper fog light cover (C) from the front bumper
(D).
Fastener Locations
A : Screw, 2 B : Screw, 1
C
A
A
B
D
3. Install the bumper fog light cover in the reverse
order of removal.
ＴＡ０８ＡＢ２Ｊ１８５１３４２７２１５ＫＢＡＴ０１
＊０１