Honda Accord 2008 Manual page 1803

07/11/02 09:38:26 61TA0000_200_0236
Seats
Rear Seat-back Cover Replacement
(cont'd)
9. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the upholstery rings
and hook strips.
• Replace any upholstery rings (A) you removed
with new ones. Install them with commercially
available upholstery ring pliers (B).
＊０６
20-234 20-234
A
B
Rear Seat Side Bolster Cover
Replacement
4-door
NOTE: Take care not to tear the seams or damage the
seat covers.
1. Remove the seat side bolster (see page 20-224).
2. Release all the hook strips (A), and fold back the
seat side bolster cover (B), and release the cover
from the hooks (C).
C
A
C
C
3. Install the cover in the reverse order of removal. To
prevent wrinkles when installing a side bolster
cover, make sure the material is stretched evenly
over the pad before securing the hook strips and
the cover with the hooks.
ＴＡ０８ＡＢ４Ｊ４６１６６４５３７４１ＫＢＡＴ００
＊０１
C
B
C