X/Y Memory Access From Dmac; Usage Note; Sleep Mode; Address Error - Renesas HD6417641 Hardware Manual

8.4

X/Y Memory Access from DMAC

The X/Y memory can be accessed by the DMAC via the I bus. Use the addresses
between H'05007000 and H'05008FFF or H'05017000 and H'05018FFF.
8.5

Usage Note

When accessing the X/Y memory from the CPU and DSP, if the cache is on, access must be
performed from space P2 (non-cacheable space). Operation during access from space P0 cannot be
guaranteed. When the cache is off, spaces P0 and P2 can both be used. Specify the P2 area for
parallel operation and double data transfer. (See section 3.1.9, Data Transfer Operation.)
8.6

Sleep Mode

In sleep mode, the X/Y memory is not accessed from the I bus master module such as DMAC.
8.7

Address Error

When an address error in write access to the X/Y memory occur, the contents of the X/Y memory
may be corrupted.
Section 8 X/Y Memory
Rev. 4.00 Sep. 14, 2005 Page 195 of 982
REJ09B0023-0400