Figure 3.23 Load/Store Control For Single-Data Transfer Instruction - Renesas HD6417641 Hardware Manual

Single-Data Transfer Instructions (MOVS.W and MOVS.L): This LSI has single load/store
instructions for the DSP registers. It is similar to a load/store instruction for a system register. It
transfers data between memory and DSP data registers using LAB and LDB buses. There may be
access conflict between data access and instruction fetch.
The single-data transfer instruction has word and longword access modes. Figure 3.23 shows a
block diagram of single-data transfer. The existing CPU core's hardware resource is used for
control of the memory address buffer (MAB) and memory selection.
31 0
R2 [As]
R3 [As]
R4 [As]
R5 [As]
31 0
MAB
32-bit
LAB
Memory
LDB
32-bit

Figure 3.23 Load/Store Control for Single-Data Transfer Instruction

Control
in CPU
Section 3 DSP Operation
Instruction code for single data transfer
operation
As Ms WL LS
Control
Rev. 4.00 Sep. 14, 2005 Page 141 of 982
Ds
Input/output control for
DSP data registers
REJ09B0023-0400