Section 25 Flash Memory
25.5
Protection
There are three kinds of flash memory program/erase protection: hardware, software, and error
protection.
25.5.1
Hardware Protection
Programming and erasing of flash memory is forcibly disabled or suspended by hardware
protection. In this state, the downloading of an on-chip program and initialization are possible.
However, an activated program for programming or erasure cannot program or erase locations in a
user MAT, and the error in programming/erasing is reported in the parameter FPFR.
Rev. 1.00 Mar. 12, 2008 Page 982 of 1178
REJ09B0403-0100