Link Status; Lldp - Avaya G450 Cli Reference Manual

Roadmap

Link status

Table 49: Link status CLI commands
Command
show isdn bri link
show isdn link summary
show isdn pri link

LLDP

Table 50: LLDP configuration CLI commands
Command
set lldp re-init-delay
set lldp system-control
set lldp tx-delay
set lldp
tx-hold-multiplier
set lldp tx-interval
set port lldp
set port lldp tlv
show lldp
show lldp config
82 Avaya G450 CLI Reference
Description
View the status of all BRI links on a media module
View a summary of all ISDN links
View the status of all PRI links on a media module
Description
Set the delay from when an LLDP is disabled on a port
until re-initialization is attempted
Enable or disable the LLDP application globally per
device or stack
Set the minimal delay in seconds between successive
LLDP frame transmissions, on each port
Set the multiplier on the interval that determines the
actual TTL value sent in an LLDP frame
Set the interval at which the device transmits LLDP
frames
Change the administrative LLDP status of a port
Enable or disable the transmission of the optional TLVs
on a per port basis
Display the LLDP information received on each port
Display the global LLDP configuration
1 of 2