Interface Ethernet Speed; Interface Ethernet Traffic-Class-Table - Avaya 2330 Reference Manual

Syntax
REM_ <string>
Table 70: Variable definitions
<string>
Example
AG/configure/interface/ethernet (0/1)# REM_ "Configured on July 30".

interface ethernet speed

Use this command to configure the speed of an Ethernet interface.
Syntax
speed {10|100|1000|auto} mode {half_duplex| full_duplex}
Table 71: Variable definitions
{10 | 100 | 1000 | auto}
{half_duplex | full_duplex}
<slot/port>
Example
AG/configure/interface/ethernet (0/1)# speed auto mode full_duplex

interface ethernet traffic-class-table

Use this command to configure the traffic class tables values, specifically, the user priority and
number of supported traffic classes.
Command Line Reference
Variable
Variable
Value
Specifies the comments. The string length
for comments is 80 characters. You must
enclose comments in quotation marks.
Value
Specifies the speed of the port. The default
value is auto.
Specifies the operating mode for the port.
The default value is half_duplex.
Specifies the slot and port numbers that
identify the port for configuration. For
example, 6/1.
interface ethernet speed
August 2013 91