Error Messages - Agilent Technologies 35670A Manual

Error Messages

Introduction
This appendix contains a listing of all the error messages that can be generated by the HP 35670A in
response to GPIB commands. Each message consists of an error number (always negative) followed by a
string. The string contains a general description of the error followed by additional information about the
cause of the error.
In this appendix, error numbers and their general descriptions are shown using a bold font. Phrases that
complete the descriptions with additional information are grouped under the associated error number.
Up to five error messages are temporarily stored in the analyzer's error queue. They are returned to the
controller, one message at a time, when you send the SYST:ERR query.
C-1