Agilent Technologies 35670A Manual page 349

INPut
The commands in this subsystem control the characteristics of the analyzer's input channels. They
configure the inputs for Channel 1, Channel 2, Channel 3, and Channel 4.
Because there are two input channels in the Agilent 35670A and four channels in the Agilent 35670A
(Option AY6), you must specify the channel you want to configure when you send a command. If you do
not explicitly specify one of the channels, the analyzer configures Channel 1.
Note
The Agilent 35670A has up to four input channels (1,2, 3 and 4) and four trace boxes
(A, B, C, and D). None of the channels are linked to a particular trace box. You can
display data from any input channel in any trace box.
12
12-1