M•Core-Specific Error And Status Messages - Agilent Technologies E5900B User Manual

Troubleshooting the Emulation Probe
Problems with the Target System
M•CORE-specific error and status messages
The following is a list of unique error messages that may be encountered for
this product.
ERROR 143: "All Hardware Instruction Breakpoints In Use"
The MMC2107 firmware allows two hardware breakpoints.
ERROR 145: "Undefined Breakpoint Attribute"
An attempt was made to assign an unrecognized attribute to a breakpoint.
ERROR 610: "Unable to run"
The emulation probe issued a "run" command and the processor is
unexpectedly in debug mode. A target system function may have caused the
processor to stay in debug mode.
ERROR 646: "No Target Power"
The following is a list of messages indicating interaction between the
emulation probe and the target processor.
ASYNC_STAT 180: "Target power is Off"
ASYNC_STAT 643: "Target Reset"
The target processor has been reset.
ASYNC_STAT 601: "Hardware breakpoint: Load/Store"
A hardware breakpoint has been set within the processor.
144 Emulation for the Motorola M•CORE