Agilent Technologies 35670A Manual page 261

DISPlay:FORMat
Selects a format for displaying trace data.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
When you select SING, the analyzer uses the entire screen for the active trace box. If multiple traces are
active (set with the CALC:ACTIVE command), the active traces are changed to a single active
trace—trace A or trace C.
When you send ULOW, the analyzer uses the upper half of the screen for trace box A or trace box C and
the lower half for trace box B or trace box D.
When you select FBAC, the analyzer uses the entire screen, but overlays the two trace boxes in the same
area.
When you select SUBL, the analyzer uses the upper quarter of the screen for trace box A or trace box C
and the lower portion of the screen for trace box B or trace box D.
When you send ULFB, the analyzer combines the ULOW format with the FBAC format. Trace A is the
front and trace B is the back in the upper trace box. Trace C is the front and trace D is the back in the
lower trace box.
When you send QUAD, the analyzer displays four trace boxes.
Note
Waterfall displays (DISP[:WIND]:WAT[:STATe] ON) are not valid in FBACk or
ULFB formats.
DISPlay:FORMat SINGle|ULOWer|FBACk|SUBL|ULFB|QUAD
OUTPUT 711;"DISPLAY:FORM ULFB"
OUTPUT 711;"display:form ULOWER"
DISPlay:FORMat?
SING|ULOW|FBAC|SUBL|ULFB|QUAD
Option: not applicable
Synchronization Required:
Preset State: SING
SCPI Compliance:
no
instrument-specific
DISPlay
command/query
8-7