Agilent Technologies 35670A Manual page 333

HCOPy:PAGE:DIMensions:AUTO
Specifies P1 and P2 values for a plotter.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
Send HCOP:PAGE:DIM:AUTO ON if you wish to use the plotter's current P1 and P2 settings. The
analyzer does not send P1 and P2 values to the plotter.
Send HCOP:PAGE:DIM:AUTO OFF if you want to set your own P1 and P2 values. The analyzer sends
commands to the plotter which programs the P1 and P2 values when the HCOP:IMM command is
executed. P1 and P2 values are specified with the HCOP:PAGE:DIM:LLEF and
HCOP:PAGE:DIM:URIG commands.
HCOPy:PAGE:DIMensions:AUTO OFF|0|ON|1
OUTPUT 711;"HCOP:PAGE:DIM:AUTO ON"
OUTPUT 711;"hcopy:page:dimensions:auto OFF"
HCOPy:PAGE:DIMensions:AUTO?
Integer
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
approved
HCOPy
command/query
10-19