Agilent Technologies 35670A Manual page 498

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]SWEep:DIRection

Specifies the direction of the sweep.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

To initiate a sweep that begins at the lowest frequency (FREQ:STARt) and ends at the highest frequency

(FREQ:STOP), send SWE:DIR UP.

To initiate a sweep that begins at the highest frequency (FREQ:STOP) and ends at the lowest frequency

(FREQ:STARt), send SWE:DIR DOWN.

This command is not used if a manual sweep is specified with the SWEep:MODE MAN command.

[SENSe:]SWEep:DIRection UP|DOWN

OUTPUT 711;"SENS:SWE:DIRECTION UP"

OUTPUT 711;"swe:direction UP"

[SENSe:]SWEep:DIRection?

Synchronization Required:

Preset State:

SCPI Compliance:

command/query