Agilent Technologies 35670A Manual page 179

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:MARKer:FUNCtion:RESult?

Returns the result of the calculation for the currently selected marker function.

Query Syntax:

Example Statements:

Return Format:

Attribute Summary:

Description:

This command returns the value of the marker function result calculation. To specify trace box A, send

CALC1. To specify trace box B, send CALC2; trace box C, send CALC3; and trace box D, send

CALC4. The trace specifier defaults to trace box A if the specifier is not used.

For example, send CALC3:MARK:FUNC GMAR then send CALC:MARK:FUNC:RES? to query the

value of the gain margin of trace C. To determine the units, send CALC3:MARK:FUNC:RES? UNIT.

Refer to the CALC:MARK:FUNCtion command for a complete listing of the available marker functions.

The analyzer returns the result 9.91E37, if it can not calculate a marker function.

In addition to function calculations, use this command to determine if one of the filters (A-weight,

B-weight, or C-weight) was applied to the measurement data or to determine the Z-axis value for the

measurement data.

CALCulate[1|2|3|4]:MARKer:FUNCtion:RESult?

OUTPUT 711;"CALCULATE4:MARK:FUNCTION:RES?"

OUTPUT 711;"calc4:marker:func:result?"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific