Agilent Technologies 35670A Manual page 213

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:SYNThesis:FSCale

Specifies a frequency scale for the synthesis operation.

Command Syntax:

<number> ::= a real number (NRf data)

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command scales the synthesis model along the X-axis by f/frequency scale, where f is frequency in

Hz. The frequency scale must be a positive value.

The value can be used to scale poles and zeros from Hz to radians-per-second by setting the scaling value

to 1 / (2 π).

Pole and zero terms are not multiplied by 1/frequency scale.

This command must be sent before CALC:SYNT.

This command is not trace specific. It ignores the trace specifier.

OUTPUT 711;"CALC2:SYNTHESIS:FSC 300318"

OUTPUT 711;"calculate3:synt:fsc 669766"

CALCulate[1|2|3|4]:SYNThesis:FSCale?

1D3 Curve Fit/Synthesis

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query