Agilent Technologies 35670A Manual page 332

HCOPy
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:MARKer:COLor
Selects the pen used to plot markers for the specified trace.
Command Syntax:
<number> ::= a real number (NRf data)
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The marker pen is used to plot all markers; including the main markers, limit lines, the marker reference
and marker functions.
The trace specifier you send with this command determines which trace marker you are selecting. Omit
the specifier or send 1 for trace A markers; send 2 for trace B markers; send 3 for trace C markers; send 4
for trace D markers.
Nothing is plotted with a pen whose value is specfied as 0 or with a pen whose specified value is too large
for your plotter.
10-18
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:MARKer:COLor <num-
ber>|<step>|<bound>
limits: 0:16
OUTPUT 711;"hcopy:item:window:trace:marker:color 4"
OUTPUT 711;"HCOP:ITEM:WIND3:TRAC:MARK:COL 9"
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:MARKer:COLor?
Integer
Option: not applicable
Synchronization Required:
Preset State: +2 (MARKA)
+3 (MARKB)
+5 (MARKC)
+6 (MARKD)
SCPI Compliance:
no
instrument-specific
command/query